Buy all products at a reduced price!
ScanGlide Nanoglider CT 30ml.
Environmentally friendly and fluor carbon free nanoglider to temperatures ranging from -3 to -10 degrees C. Suitable for all types of snow. Highly water and dirt repellent! Easy application. Apply with the sponge on the bottle. Ready for use just after a few minutes. The glider is very effective and stays on mile after mile. Clean first the ski base with ScanGlide Wax Remover. This conditions the base and opens the pores of the ski base allowing ScanGlide NanoGlider CT to enter deep into the sole. A bottle of ScanGlide NanoGlider CT 30 ml. consumption to approximately minimum 20-30 applications, so it is very durable in use.
ScanGlide Nanoglider MT 30ml.
Environmentally friendly and fluorinecarbon free, nanoglider to temperatures from +10 to -3 degrees C. Suitable for all types of snow. Highly water and dirt repellent! Easy application. Apply with the sponge on the bottle. Ready for use just after a few minutes. The glider is very effective and stays on mile after mile. Clean first the ski base with ScanGlide Wax Remover. This conditions the base and opens the pores of the skibase allowing ScanGlide NanoGlider MT enter deep into the sole. A bottle of ScanGlide NanoGlider MT 30 ml. consumption to approximately 20-30 applications, so it is very durable in use.
ScanGlide Nanoglider XCT 30ml.
Environmentally friendly and fluorinecarbon free, nanoglider to temperatures from -10 to -25 degrees C. Suitable for all types of snow. Highly water and dirt repellent! Easy application. Apply with the sponge on the bottle. Ready for use just after a few minutes. The glider is very effective and stays on mile after mile. Clean first the ski base with ScanGlide Wax Remover. This conditions the base and opens the pores of the skibase allowing ScanGlide NanoGlider XCT enter deep into the sole. A bottle of ScanGlide NanoGlider XCT 30 ml. consumption to approximately 20-30 applications, so it is very durable in use.
ScanGlide Nanobase Base X 30ml.
ScanGlide Nanobase Base X is a newly developed product aimed towards preparation of soles on skis and boards. This glider is in liquid form and have no fluoride in it. The glider is based on nanotechnology and last mile after mile.
Wax Remover 0,5 L.
Effective and gentle allround base cleaner for all types of skibases.
Dissolves and removes all types of old fluoride glider, fluorinatedpowder, topping and waxes. ScanGlide Wax Remover is manufactured by the latest technology and is designed to remove fluoride products without damaging paraffin base in the sole.
ScanGlide Wax Remover can use over the ski base as it also clarifies the sole for new glider. ScanGlide Wax Remover is specifically designed to optimize the sole before using ScanGlide NanoGlider’s. Apply a thin layer of wax remover onto the base with a lint-free cloth / fiberlen. Wipe the ski base clean with lint-free cloth / fiberlen, use scratching if necessary. Then wipe over the ski base again with lint-free cloth / fiberlen in longitudinal direction so it is completely clean for old dirt and are dust free.
Kampanjepakke fra ScanGlide til redusert pris. Inneholder Glider, Topping og Voksfjerner.
Model 00305
Buy all products at a reduced price!
ScanGlide Nanoglider CT 30ml.
Environmentally friendly and fluor carbon free nanoglider to temperatures ranging from -3 to -10 degrees C. Suitable for all types of snow. Highly water and dirt repellent! Easy application. Apply with the sponge on the bottle. Ready for use just after a few minutes. The glider is very effective and stays on mile after mile. Clean first the ski base with ScanGlide Wax Remover. This conditions the base and opens the pores of the ski base allowing ScanGlide NanoGlider CT to enter deep into the sole. A bottle of ScanGlide NanoGlider CT 30 ml. consumption to approximately minimum 20-30 applications, so it is very durable in use.
ScanGlide Nanoglider MT 30ml.
Environmentally friendly and fluorinecarbon free, nanoglider to temperatures from +10 to -3 degrees C. Suitable for all types of snow. Highly water and dirt repellent! Easy application. Apply with the sponge on the bottle. Ready for use just after a few minutes. The glider is very effective and stays on mile after mile. Clean first the ski base with ScanGlide Wax Remover. This conditions the base and opens the pores of the skibase allowing ScanGlide NanoGlider MT enter deep into the sole. A bottle of ScanGlide NanoGlider MT 30 ml. consumption to approximately 20-30 applications, so it is very durable in use.
ScanGlide Nanoglider XCT 30ml.
Environmentally friendly and fluorinecarbon free, nanoglider to temperatures from -10 to -25 degrees C. Suitable for all types of snow. Highly water and dirt repellent! Easy application. Apply with the sponge on the bottle. Ready for use just after a few minutes. The glider is very effective and stays on mile after mile. Clean first the ski base with ScanGlide Wax Remover. This conditions the base and opens the pores of the skibase allowing ScanGlide NanoGlider XCT enter deep into the sole. A bottle of ScanGlide NanoGlider XCT 30 ml. consumption to approximately 20-30 applications, so it is very durable in use.
See how it works: https://tv.nrk.no/serie/distriktsnyheter-oestafjells/DKTE99031017/10-03-2017#t=8m43s
Scanglide Topping 30 ml.
Fluid-free topping to all types of gliders, helping to increase gliding properties. Apply with the sponge to the bottle. After 5 minutes, polish it over with a fibercloth. The topping are very efficient and durable.
Wax Remover 0,5 L.
Effective and gentle allround base cleaner for all types of skibases.
Dissolves and removes all types of old fluoride glider, fluorinatedpowder, topping and waxes. ScanGlide Wax Remover is manufactured by the latest technology and is designed to remove fluoride products without damaging paraffin base in the sole.
ScanGlide Wax Remover can use over the ski base as it also clarifies the sole for new glider. ScanGlide Wax Remover is specifically designed to optimize the sole before using ScanGlide NanoGlider’s. Apply a thin layer of wax remover onto the base with a lint-free cloth / fiberlen. Wipe the ski base clean with lint-free cloth / fiberlen, use scratching if necessary. Then wipe over the ski base again with lint-free cloth / fiberlen in longitudinal direction so it is completely clean for old dirt and are dust free.
Buy all three products at a reduced price!
ScanGlide Nanoglider CT 30ml.
Environmentally friendly and fluor carbon free nanoglider to temperatures ranging from -3 to -10 degrees C. Suitable for all types of snow. Highly water and dirt repellent! Easy application. Apply with the sponge on the bottle. Ready for use just after a few minutes. The glider is very effective and stays on mile after mile. Clean first the ski base with ScanGlide Wax Remover. This conditions the base and opens the pores of the ski base allowing ScanGlide NanoGlider CT to enter deep into the sole. A bottle of ScanGlide NanoGlider CT 30 ml. consumption to approximately minimum 20-30 applications, so it is very durable in use.
ScanGlide Nanoglider MT 30ml.
Environmentally friendly and fluorinecarbon free, nanoglider to temperatures from +10 to -3 degrees C. Suitable for all types of snow. Highly water and dirt repellent! Easy application. Apply with the sponge on the bottle. Ready for use just after a few minutes. The glider is very effective and stays on mile after mile. Clean first the ski base with ScanGlide Wax Remover. This conditions the base and opens the pores of the skibase allowing ScanGlide NanoGlider MT enter deep into the sole. A bottle of ScanGlide NanoGlider MT 30 ml. consumption to approximately 20-30 applications, so it is very durable in use.
See how it works: https://tv.nrk.no/serie/distriktsnyheter-oestafjells/DKTE99031017/10-03-2017#t=8m43s
Wax Remover 0,5 L.
Effective and gentle allround base cleaner for all types of skibases.
Dissolves and removes all types of old fluoride glider, fluorinatedpowder, topping and waxes. ScanGlide Wax Remover is manufactured by the latest technology and is designed to remove fluoride products without damaging paraffin base in the sole.
ScanGlide Wax Remover can use over the ski base as it also clarifies the sole for new glider. ScanGlide Wax Remover is specifically designed to optimize the sole before using ScanGlide NanoGlider’s. Apply a thin layer of wax remover onto the base with a lint-free cloth / fiberlen. Wipe the ski base clean with lint-free cloth / fiberlen, use scratching if necessary. Then wipe over the ski base again with lint-free cloth / fiberlen in longitudinal direction so it is completely clean for old dirt and are dust free.
Kampanjepakke til redusert pris. Inneholder hele Nanoglider-serien fra ScanGlide
Model 00304
Purchase Nanoglider MT, CT and XCT 30 ml at a reduced price.
MT
Environmentally friendly and fluorinecarbon-free nanoglider to temperatures ranging from +10 to -3 degrees C. Suitable for all types of snow. Highly water and dirt repellent! Easy application. Apply with the sponge on the bottle. Ready for use just after a few minutes. The glider is very effective and stays on mile after mile. Clean first the ski base with ScanGlide Wax Remover. This conditions the base and opens the pores of the skibase allowing ScanGlide NanoGlider MT enter deep into the sole. A bottle of ScanGlide NanoGlider MT 30 ml. consumption to approximately 20-30 applications, so it is very durable in use.
CT
Environmentally friendly and fluor carbon free nanoglider to temperatures ranging from -3 to -10 degrees C. Suitable for all types of snow. Highly water and dirt repellent! Easy application. Apply with the sponge on the bottle. Ready for use just after a few minutes. The glider is very effective and stays on mile after mile. Clean first the ski base with ScanGlide Wax Remover. This conditions the base and opens the pores of the ski base allowing ScanGlide NanoGlider CT to enter deep into the sole. A bottle of ScanGlide NanoGlider CT 30 ml. consumption to approximately minimum 20-30 applications, so it is very durable in use.
XCT
Environmentally friendly and fluor carbon free nanoglider to temperatures ranging from -10 to -25 degrees C. Suitable for all types of snow. Highly water and dirt repellent! Easy application. Apply with the sponge on the bottle. Ready for use just after a few minutes. The glider is very effective and stays on mile after mile. Clean first the ski base with ScanGlide Wax Remover. This conditions the base and opens the pores of the ski base allowing ScanGlide NanoGlider XCT to enter deep into the sole. A bottle of ScanGlide NanoGlider XCT 30 ml. consumption to approximately minimum 20-30 applications, so it is very durable in use.
Here you can see how easy it is to use:
https://tv.nrk.no/serie/distriktsnyheter-oestafjells/DKTE99031017/10-03-2017#t=8m43s