Application racing

Application racing:

1. Carefully clean the base with the ScanGlide Wax Remover and brush over with a fine steel brush while the sole is still wet.

2. Wipe over with fiber cloth until the sole is free of any residues of previous products and ScanGlide Wax Remover.

3. Apply the ScanGlide Nanoglider XCT to a thin layer and allow it to dry. If any product left in areas, wipe it of with clean fiber cloth.

4. Polish with clean fiber cloth.

5. Brush carefully with nylon brush / rotor brush. Repeat points 3 - 5 once.

6. Apply today's Nanoglider, MT, CT, XCT or XR to a thin layer and let it dry. If any product left in areas, wipe it of with clean fiber cloth.

7. Polish the base with clean fiber cloth.

8. Brush carefully with nylon brush / rotor brush.

9. Leave to harden for 5-10 minutes.

God tur! (Have a nice trip)