Bestselgere

Varenr 130

Environmentally friendly and fluorinecarbon free nanoglider for temperatures from +10 to -3 degrees C. Suitable for all types of snow. Highly water and dirt repellent! Easy application.  Apply with the sponge on the bottle. Ready for use just after a few minutes. The glider is very effective and stays on  mile  after mile. Clean first the ski base  with ScanGlide Wax Remover. This conditions the base and opens the pores of the skibase allowing ScanGlide NanoGlider MT  enter  deep  into the sole. A bottle of ScanGlide NanoGlider MT 30 ml. consumption to approximately 20-30 applications, so it is very durable in use.   How to apply ScanGlide:  

Varenr 00131

Environmentally friendly and fluor carbon free  nanoglider for temperatures ranging from -3 to -10 degrees C. Suitable for all types of snow. Highly water and dirt repellent! Easy application. Apply with the sponge on the bottle. Ready for use just after a few minutes. The glider is very effective and stays on mile after mile. Clean first the ski base  with ScanGlide Wax Remover. This conditions the base and opens the pores of the ski base allowing ScanGlide NanoGlider CT to enter  deep into the sole. A bottle of ScanGlide NanoGlider CT 30 ml. consumption to  approximately minimum 20-30 applications, so it is very durable in use. How to apply ScanGlide:

Varenr 132

Environmentally friendly and free of fluorinecarbon. This Nanoglider are for temperatures from -10 to -25 degrees C. Suitable for all types of snow. Highly water and dirt repellent! Easy application.  Apply with the sponge on the bottle. Ready for use just after a few minutes. The glider is very effective and stays on  mile  after mile. Clean first the ski base  with ScanGlide Wax Remover. This conditions the base and opens the pores of the skibase allowing ScanGlide NanoGlider XCT  enter  deep  into the sole. A bottle of ScanGlide NanoGlider XCT 30 ml. consumption to approximately 20-30 applications, so it is very durable in use. How to apply ScanGlide::

Varenr 00430

ScanGlide NanoGlider XR is a specially designed glider for the alpine environment. NanoGlider XR works on most types of snow but especially suitable for artificial snow. Highly water and dirt repellent! Works very well at temperatures from +10 degrees to -10 degrees C. Very easy to use. Ski / snowboard must be cleaned with ScanGlide Wax Remover before use of NanoGlider XR. Then apply the sole  with NanoGlider XR in a thin layer. Use the sponge which is on the bottle. After 5 minutes, polish it with a soft cloth. NanoGlider XR provides a smooth, hard sole and its long lasting.   How to apply ScanGlide:

Varenr 00305

Buy all products at a reduced price! ScanGlide Nanoglider CT 30ml. Environmentally friendly and fluor carbon free  nanoglider to temperatures ranging from -3 to -10 degrees C. Suitable for all types of snow. Highly water and dirt repellent! Easy application. Apply with the sponge on the bottle. Ready for use just after a few minutes. The glider is very effective and stays on mile after mile. Clean first the ski base  with ScanGlide Wax Remover. This conditions the base and opens the pores of the ski base allowing ScanGlide NanoGlider CT to enter  deep into the sole. A bottle of ScanGlide NanoGlider CT 30 ml. consumption to  approximately minimum 20-30 applications, so it is very durable in use.   ScanGlide Nanoglider MT 30ml. Environmentally friendly and fluorinecarbon free,  nanoglider to temperatures from +10 to -3 degrees C. Suitable for all types of snow. Highly water and dirt repellent! Easy application.  Apply with the sponge on the bottle. Ready for use just after a few minutes. The glider is very effective and stays on  mile  after mile. Clean first the ski base  with ScanGlide Wax Remover. This conditions the base and opens the pores of the skibase allowing ScanGlide NanoGlider MT  enter  deep  into the sole. A bottle of ScanGlide NanoGlider MT 30 ml. consumption to approximately 20-30 applications, so it is very durable in use. ScanGlide Nanoglider XCT 30ml. Environmentally friendly and fluorinecarbon free,  nanoglider to temperatures from -10 to -25 degrees C. Suitable for all types of snow. Highly water and dirt repellent! Easy application.  Apply with the sponge on the bottle. Ready for use just after a few minutes. The glider is very effective and stays on  mile  after mile. Clean first the ski base  with ScanGlide Wax Remover. This conditions the base and opens the pores of the skibase allowing ScanGlide NanoGlider XCT  enter  deep  into the sole. A bottle of ScanGlide NanoGlider XCT 30 ml. consumption to approximately 20-30 applications, so it is very durable in use. See how it works: https://tv.nrk.no/serie/distriktsnyheter-oestafjells/DKTE99031017/10-03-2017#t=8m43s Scanglide Topping 30 ml. Fluid-free topping to all types of gliders, helping to increase gliding properties. Apply with the sponge to the bottle. After 5 minutes, polish it over with a fibercloth. The topping are very efficient and durable. Wax Remover 0,5 L. Effective and gentle allround base cleaner for all types of skibases. Dissolves and removes all types of old fluoride glider, fluorinatedpowder,  topping  and waxes. ScanGlide Wax Remover is manufactured by the latest technology and is designed to remove fluoride products without damaging paraffin base in the sole. ScanGlide Wax Remover can use over the ski base as it also clarifies the sole for new glider. ScanGlide Wax Remover is specifically designed to optimize  the sole  before using ScanGlide NanoGlider’s. Apply a thin layer of wax remover onto the base with a lint-free cloth / fiberlen. Wipe the ski base clean with lint-free cloth / fiberlen, use scratching  if necessary.  Then  wipe over the ski base again with lint-free cloth / fiberlen in longitudinal direction so it is completely clean for old dirt and are dust free.

Varenr 00307

Buy all three products at a reduced price! ScanGlide Nanoglider CT 30ml. Environmentally friendly and fluor carbon free  nanoglider to temperatures ranging from -3 to -10 degrees C. Suitable for all types of snow. Highly water and dirt repellent! Easy application. Apply with the sponge on the bottle. Ready for use just after a few minutes. The glider is very effective and stays on mile after mile. Clean first the ski base  with ScanGlide Wax Remover. This conditions the base and opens the pores of the ski base allowing ScanGlide NanoGlider CT to enter  deep into the sole. A bottle of ScanGlide NanoGlider CT 30 ml. consumption to  approximately minimum 20-30 applications, so it is very durable in use.   ScanGlide Nanoglider MT 30ml. Environmentally friendly and fluorinecarbon free,  nanoglider to temperatures from +10 to -3 degrees C. Suitable for all types of snow. Highly water and dirt repellent! Easy application.  Apply with the sponge on the bottle. Ready for use just after a few minutes. The glider is very effective and stays on  mile  after mile. Clean first the ski base  with ScanGlide Wax Remover. This conditions the base and opens the pores of the skibase allowing ScanGlide NanoGlider MT  enter  deep  into the sole. A bottle of ScanGlide NanoGlider MT 30 ml. consumption to approximately 20-30 applications, so it is very durable in use.   See how it works: https://tv.nrk.no/serie/distriktsnyheter-oestafjells/DKTE99031017/10-03-2017#t=8m43s Wax Remover 0,5 L. Effective and gentle allround base cleaner for all types of skibases. Dissolves and removes all types of old fluoride glider, fluorinatedpowder,  topping  and waxes. ScanGlide Wax Remover is manufactured by the latest technology and is designed to remove fluoride products without damaging paraffin base in the sole. ScanGlide Wax Remover can use over the ski base as it also clarifies the sole for new glider. ScanGlide Wax Remover is specifically designed to optimize  the sole  before using ScanGlide NanoGlider’s. Apply a thin layer of wax remover onto the base with a lint-free cloth / fiberlen. Wipe the ski base clean with lint-free cloth / fiberlen, use scratching  if necessary.  Then  wipe over the ski base again with lint-free cloth / fiberlen in longitudinal direction so it is completely clean for old dirt and are dust free.

Varenr 00304

Purchase Nanoglider MT, CT and XCT 30 ml at a reduced price. MT Environmentally friendly and fluorinecarbon-free nanoglider to temperatures ranging from +10 to -3 degrees C. Suitable for all types of snow. Highly water and dirt repellent! Easy application.  Apply with the sponge on the bottle. Ready for use just after a few minutes. The glider is very effective and stays on  mile  after mile. Clean first the ski base  with ScanGlide Wax Remover. This conditions the base and opens the pores of the skibase allowing ScanGlide NanoGlider MT  enter  deep  into the sole. A bottle of ScanGlide NanoGlider MT 30 ml. consumption to approximately 20-30 applications, so it is very durable in use. CT Environmentally friendly and fluor carbon free  nanoglider to temperatures ranging from -3 to -10 degrees C. Suitable for all types of snow. Highly water and dirt repellent! Easy application. Apply with the sponge on the bottle. Ready for use just after a few minutes. The glider is very effective and stays on mile after mile. Clean first the ski base with ScanGlide Wax Remover. This conditions the base and opens the pores of the ski base allowing ScanGlide NanoGlider CT to enter deep into the sole. A bottle of ScanGlide NanoGlider CT 30 ml. consumption to  approximately minimum 20-30 applications, so it is very durable in use. XCT Environmentally friendly and fluor carbon free  nanoglider to temperatures ranging from -10 to -25 degrees C. Suitable for all types of snow. Highly water and dirt repellent! Easy application. Apply with the sponge on the bottle. Ready for use just after a few minutes. The glider is very effective and stays on mile after mile. Clean first the ski base  with ScanGlide Wax Remover. This conditions the base and opens the pores of the ski base allowing ScanGlide NanoGlider XCT to enter  deep into the sole. A bottle of ScanGlide NanoGlider XCT 30 ml. consumption to  approximately minimum 20-30 applications, so it is very durable in use. Here you can see how easy it is to use:  https://tv.nrk.no/serie/distriktsnyheter-oestafjells/DKTE99031017/10-03-2017#t=8m43s